Olycom Gigabit Industrial Managed PoE Switch
Key Features of 4 port PoE switch
- Support power on POE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
- IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
- 4 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 2 x 1000Mbps SFP fiber port
- 6 KV Ethernet surge protection, adapt to a harsh outdoor
environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- A store-and-forward switching mechanism
- Operating environment temperature: -40 ° ~75 ° c
- meet IP40 protection degree and EMC industrial grade requirements
- DIN rail installation
Technical information of mini poe switch
| Product Name | 10/100/1000Mbps Managed Industrial POE Fiber Switch(2F+4TP) |
| Model No. | IM-FP244GM |
| Port | 2 x 1000Mpbs SFP port SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE 802.3x ,
IEEE 802.1Q VLAN Tagging, IEEE 802.1p CoS, IEEE 802.1X, IEEE
802.3ad, ITU-T G.8032 ERPS, IEEE802.3af, IEEE802.3at |
| Protocol | IGMPv1/v2,GVRP,SNMPv1/v2c/v3,DHCP Client
TFTP,SMTP,RMON,HTTP,HTTPS,Telnet,Syslog,GVRP SSH,SNMP
Inform,LLDP,SNTP Server/Client,PVLAN |
| MIB | MIB-II,Ethernet-Like MIB,P-BRIDGE MIB,Q-BRIDGE MIB Bridge MIB,RSTP
MIB,RMON MIB Group 1,2,3,9 |
| Switching Features | Priority queue: 4 Number of VLANs: 256 VLAN ID: 1～4094 Number of multicast groups: 256 MAC table: 4K Packet buffer: 1Mbit Packet forwarding rate: 14.88Mpps Exchange delay: <5μs |
| Alarm Output | One relay alarm output: support IP/MAC conflict, power supply, port
and ring alarm |
| Power supply | Input voltage: DC48-52V POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W/30W (port 1~4) Support reverse connection, overload protection and redundant
protection |
| Environment | Working Temp: -40°～ 75°C Storage Temp: -40°～ 75°C Working humidity: 5%～95%, non-condensing |
| Industry Standards | EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±8kV(contact),± 15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-6(CS) 3V(10kHz～150kHz);10V(150kHz～80MHz) IEC61000-4-16 30V(cont.),300V(1s) IEC60068-2-6, IEC60068-2-27, IEC60068-2-32 IEC61000-6-2 EN50155,EN50121-4 NEMA TS-2 |
| Mechanical information | Shell: Corrugated metal shell; Safety class: IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method: Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Management Features of industrial network switch
- Support ITU-T G.8032 Ethernet Protection Ring(EPR)
- Supports CLI for quick and easy configuration of key management
functions
- Using RMON to Effectively Improve Network Monitoring and Prediction
Capabilities
- Support port locking based on MAC address to prevent illegal
intrusion
- DHCP Option 82 is used to assign IP addresses with different
strategies
- Support ERPS standard ring network protocol
- IGMP Snooping and GMRP filter multicast traffic
- Support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol, easy
network planning
- Support SNMPv3, IEEE 802.1X, HTTPS and SSH to enhance network
security
- Support TACACS+
- Realize automatic alarm through E-mail and relay output
- Reset: Support restart and restore default configuration
- Support port mirroring
- Supports Ethernet/IP for device management and control
- Support multicast, broadcast storm control
- Bandwidth management: support port aggregation, port speed limit,
broadcast storm suppression
- Support QoS and ToS/DiffServ for traffic control and management
- Support link aggregation to optimize bandwidth utilization
Dimension of managed gigabit switch
More Photos of industrial network switch
Company Profile
We manufacture and market fiber optic connectivity devices.
We provide solutions and services of industrial fiber switch, fiber
to copper media conversion, Ethernet networking, and CCTV video
surveillance.
ISO9001 Quality System
We got necessary certificates to support our products.
Full-Spectrum environment and electrical testing of all product
design
Welding: Weld the necessary components
Cleaning: To avoid any possible dysfunction due to dust or scraps
on the PCB boards.
Assembling: Builds up components of a product, like panels, screws,
PCB boards.
Testing: To make sure the product is basically working fine after
assembling
Aging: To check if the product can work smoothly for long time
without any minors such as LED indicators, voltage. This will
usually last for 24 to 48 hours.
Testing: To test if the product can process data or video signals
correctly. Any data loss? Transmission rate correct? Any data
packet failure? Such questions would be verified in this procedure.
QC testing: This is the third and also last check of product
quality. If it goes good, our packing staff will pack it up
according to customer requirements and attach to the packing box a
product label.
When all above is done, the product will go to market.
