Gigabit Ethernet 4SFP Fiber Ports 4RJ45 Ports Industrial Managed
Switch
Introduction
IM-FS440GW is the 10/100/1000 Mbps Industrial Managed Switch,
operating temperature-40 ℃ to + 75 ℃, support wide voltage dual
power input, support web management, meet IP40 protection degree
and EMC industrial grade requirements, DIN rail installation, pass
through dangerous environmental certification and comply with FCC
and CE standards. The reliable industrial grade design could ensure
continuous and stable operation of the automation system.
Key Features
4 x 10/100/1000Mbps Auto-sensing TX RJ45 ports
4 x 1000Mbps SFP fiber port
Support cable diagnosis and can locate the fault point
Support IEEE802.3az EEE (Energy Efficient Ethernet) Management,
optimize power consumption
Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
Support Qos, transport classification Qos, Cos, bandwidth control
(input/output direction), storm suppression ,differentiated
services
Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN,
Protocol VLAN,VLAN convert, MVR
Support dynamic IEEE802.3ad LACP link aggregation, static link
aggregation
Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating,
IGMP searching
Support IGMP agent report, MLD snooping
Safety: based on port and Mac IEEE802.1X, RADIUS, ACL,
TACACS+,HTTP/HTTPS, SSL/SSH v2
Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
Support software upgrade via TFTP and HTTP, firmware redundancy
prevents upgrade failing
Support DHCP client/Relay/Snooping/Snooping option 82/Relay option
82
Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP,
IEEE802.1ab LLDP
Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL,
NTP/SNTP,TFTP, QoS, ACL.
Spectification
| Product Name | Industrial Managed Switch (4F+4TP) |
| Model No. | IM-FS440GW |
| Port | 4 x 1000Mpbs SFP port SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km; 4 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP,
IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344,
IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af,
IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features | Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam) |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply | Input voltage:DC 9-36V; No-load power:5W; Reverse connection: support |
| Environment | Working Temp:-40°～ 75°C ; Storage Temp:-40°～ 85°C;Working
humidity:10%～90%, non-condensing; Storage humidity:10%～95%,
non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3, EN 61000-4-8; Traffic Control:NEMA-TS2; Vibration:IEC
60068-2-6; Freefall:IEC 60068-2-32; Shock:IEC 60068-2-27; Rail
Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial ; CE/LVD EN60950 |
| Mechanical information | Shell:Corrugated metal shell; Safety class:IP40; Dimension:158 x 114.8 x 60mm; Mounting method:Din-rail mounting |
| Warranty | Replacement within 1year; 5 years repairing |
Application
Glossary
LACP
LACP is an IEEE 802.3ad standard protocol. The Link Aggregation
Control Protocol, allows bundling several physical ports together to form a single logical port.
LLC
The IEEE 802.2 Logical Link Control (LLC) protocol provides a link
mechanism for upper layer protocols. It is the upper sub-layer of the Data Link Layer and provides multiplexing
mechanisms that make it possible for several network protocols (IP, IPX) to coexist within a multipoint network. LLC header
consists of 1 byte DSAP (Destination Service Access Point), 1 byte SSAP (Source Service Access Point), 1 or 2 bytes Control field
followed by LLC information.
LLDP
LLDP is an IEEE 802.1ab standard protocol. The Link Layer Discovery
Protocol(LLDP specified in this standard allows stations attached to an IEEE 802 LAN to advertise, to other stations
attached to the same IEEE 802 LAN, the major capabilities provided by the system incorporating that station, the management
address or addresses of the entity or entities that
provide management of those capabilities, and the identification of
the stations point of attachment to the IEEE 802 LAN required by those management entity or entities. The information
distributed via this protocol is stored by its recipients in a standard Management Information Base (MIB), making it possible for
the information to be accessed by a Network
Management System (NMS) using a management protocol such as the
Simple Network Management Protocol (SNMP).
LLDP-MED
LLDP-MED is an extension of IEEE 802.1ab and is defined by the
telecommunication industry association (TIA-1057).
